Operation; Setting The Operating Mode - Renkforce v1384778 Bedienungsanleitung

11. Operation

a) Setting the Operating Mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Ad-
ditionally, it can be used as a master device with integrated controller to control other connected effect
lights synchronously in master-slave operation, or as slave device via the controller of another effect light.
The operating modes are set in the menu via the display (1) and the function buttons MENU (3), UP (2),
DOWN (7) and ENTER (6).
• MENU (3) = Selection of the main menu items / return to the main menu level
• UP (2) und DOWN (7) = Movement in the main menu level / changes to set values
• ENTER = Option selection / confirmation of settings
Overview of the setting options for the operating mode
Display Option
Addr A001-A512
CHnd 4CH / 6CH / 8CH
SLAV
SOUn Sd01-Sd30
AUtO
FLSH FL00-FL51
JUNP JU01-JU99
FL00-FL04
FAdE FF01-FF99
COLO C000-C255
NAnU r000-r255
G000-G255
b000-b255
U000-U255
dISP NO / YES
Function
Selection of DMX starting address
DMX operation with 4 / 6 / 8 channels
Slave mode
Sound-to-light mode with sensitivity setting
Automatic mode
Setting the strobe speed at static colours (COLO)
Colour change effect / Setting colour change speed
Colour change effect / Setting strobe speed
Fade effect / Setting speed
Selection of different static colours
Static colour, brightness red
Static colour, brightness green
Static colour, brightness blue
Static colour, brightness white
Display alignment (NO = normal / YES = turned)
27