Personal Safety - Royal Catering Rc Wms 04 Bedienungsanleitung
Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
b)
Do not use the unit in an explosive area, for example in the presence of
flammable liquids, gases or dust. The unit produces sparks that can ignite dust
or fumes.
c)
If you find any damage or irregularities in the operation of the unit,
immediately turn it off and report it to an authorized person.
d)
Only the manufacturer's service department may repair the unit. Do not
attempt to repair the product on your own!
e)
In case of open flames or fire, use only dry powder or snow (CO2) fire
extinguishers to extinguish the live equipment.
f)
No children or unauthorized persons are allowed in the work area. (Inattention
may result in loss of control of the unit.)
g)
Use the unit in a well-ventilated area.
h)
Check the condition of the safety stickers regularly. Replace them if they are
illegible.
i)
Keep these instructions for use for future reference. If the product is to be
handed over to a third party, hand it over with this user manual.
j)
Keep packaging components and small installation parts out of the reach of
children.
k)
Keep the device away from children and animals.
l)
When using this product together with other devices, also follow the other
instructions for use.
Remember! Keep children and other bystanders safe while operating the
equipment.
2.3.
Personal safety
a)
Do not operate this device if you are tired, ill or under the influence of alcohol,
drugs or medication that could impair your ability to operate the device.
b)
The device is not intended to be used by persons (including children) with
reduced mental, sensory or intellectual functions or persons who lack
experience and/or knowledge unless they are supervised or have been
instructed by a person responsible for their safety on how to operate the
device.
c)
Use caution and common sense when operating this device. A moment's
inattention during operation may result in serious personal injury.
d)
To prevent accidental start-up, make sure the switch is in the off position
before connecting to a power source.
Inhaltsverzeichnis
