Printing When A Power Outlet Is Not Available; Installing The Battery; Charging The Battery - Canon SELPHY CP900 Benutzerhandbuch

Printing When a Power Outlet is not Available

You can use the battery pack NB-CP2L (sold separately) and charger adapter CG-CP200 (sold separately)
to print images where there is no power outlet. You can print approximately 36 sheets* of postcard size paper
with a fully charged battery.
* The number of printable pages is determined by our testing conditions. It may differ depending on the
printing conditions.

Installing the Battery

1
2

Charging the Battery

Using SELPHY with a Battery
For cautions concerning the battery, refer to the user guide included with the battery.
O
Keep SELPHY on a stable surface such as a desk while it is connected to the charger adapter and take care not
O
to unplug the charger adapter cable.
48
Remove the battery terminal cover.
Attach the battery to the charger adapter.
First insert in the direction indicated by
O
the direction indicated by
place.
Connect the power cord to the charger adapter
with the attached battery.
The battery charge starts and the orange lamp will be lit.
X
The battery charge will complete after approximately 4
X
hours and the green lamp will be lit.
The charge will continue even if you turn SELPHY on
O
while the charger adapter is connected to it. However,
the charge stops while printing.
Connect the charger adapter to SELPHY.
, and then in
until it clicks and locks into