Making Skin Look Smooth In Prints (Smooth Skin) - Canon SELPHY CP900 Benutzerhandbuch

Making Skin Look Smooth in Prints (Smooth Skin)

Makes skin look smooth and beautiful in prints.
O
Off (Default setting) /
O
Correction may be applied to areas other than skin, producing unexpected results.
O
This setting is reset to [
O
When [ Index] is selected in [Page Layout]
O
Getting the Best Results With Auto Correction (Image Optimize)
Some images may not be adjusted correctly.
O
Turning off SELPHY will return the setting to [
O
When [ Index] is selected in [Page Layout]
O
The level of correction will change depending on the page layout and paper size.
O
Adjusting the Brightness (Brightness)
Turning off SELPHY will return the setting to [±0].
O
When [ Index] is selected in [Page Layout]
O
Changing the Color Tone (My Colors)
You can adjust the colors in your images, or make your images sepia-toned or black and white.
O
Off
(Default setting)
Emphasizes the contrast and color
Vivid
saturation for a vivid impression
Tones down the contrast and color
Neutral
saturation for neutral hues
Turning off SELPHY will return the setting to [
O
Depending on the settings made in My Colors, [Correct Red-Eye]
O
On
Off] when printing finishes, SELPHY is turned off, or the memory card is removed.
(p. 22), [Smooth Skin] will not be applied.
On].
(p. 22), [Image Optimize] will not be applied.
(p. 22), [Brightness] will not be applied.
–
Off].
SELPHY will automatically correct the image to
O
achieve optimum image quality.
Off / On (Default setting)
O
You can adjust the brightness of an image within
O
a range of ±3.
The larger the + value, the brighter the image
O
gets. The larger the - value, the darker the image
gets.
Intense, natural colors like those
PositiveFilm
obtained with positive film
Changes the image to sepia tone
Sepia
Black and white
B/W
(p. 21) settings may not be applied.
23