Selecting And Printing Images - Canon SELPHY CP900 Benutzerhandbuch

Selecting and Printing Images

You can select an image and specify the number of copies for printing. In this section, an SD memory card
will be used as an example, but you can print from other memory cards using the same steps.
1
2
3
Label side
4
5
Number of copies for the
displayed image
Turn on SELPHY.
Press and hold the q button until the screen shown on
O
the left is displayed.
To turn the power off, press and hold the q button and
O
release when the screen display changes.
Raise the screen (LCD monitor).
Do not raise the LCD monitor more than 45° as this may
O
result in damage or malfunction.
Approx. 45°
Insert the memory card into the slot.
Insert the card faced as shown in the illustration until it
O
clicks.
To remove the card, push it in until it clicks and release
O
your finger slowly.
The screen in Step 4 below (image display screen)
X
(p. 7)
Select an image.
Press the lr buttons to select an image to print.
O
Every 5th image will be displayed if you press and hold
O
the lr buttons.
Select the number of copies.
Press the ud buttons to select the number of copies.
O
If you press and hold the ud buttons, the number
O
increases or decreases by 5 copies.
To print another image at the same time, repeat Steps 4
O
and 5.
Number of copies
will be displayed.
13