Overload Display; Troubleshooting Guide - Refco Refscale-S Bedienungsanleitung

9.1

Overload display

If the weight applied to the platform exceeds the maximum
capacity of the REFSCALE-S (110 kg / 243 lb), the display will show
"OOR", which means "Out of Range". This applies to the absolute
weight measurement.
To avoid damage to the REFSCALE-S, remove the weight
from the platform immediately.
9.2

Troubleshooting Guide

Failure
Device cannot be
switched on
OOR
Stable measured
value is not met
Display does not
change
Wireless
connection not
working
ZERO doesn't work
Instruction Manual
Troubleshooting
Battery inserted incorrectly.
Battery contact break was not pulled
out.
Weight over 110 kg.
Reduce weight immediately.
Re-align the device.
Restart the device.
Hold function is activated (Hold function
symbol is displayed).
A device is already connected. This can
be seen when the Wireless connection
symbol lights up continuously.
Exceeding the maximum permitted
deviation limit of 100 grams.
29