Connections - Refco Refscale-S Bedienungsanleitung

Memory
In the work mode, the current displayed weight reading can be
saved by pressing the Enter button
can be saved. The data can be subsequently read from the
Memory.
1. press
2. press
3. press
4. press
5. press
6. press
Information
1. press
2. press
3. press
4. press
SW V: Current software version
HW V: Current hardware version
PAR. C: When recalibrating or changing the GEO value, the
display increases.
6.2

Connections

26
, to enter the menu
, navigate to Memory
, confirm
, navigate to the data
, to open the desired data
, to exit from the Memory
, to enter the menu
, navigate to Information
, confirm
, to move between the information's
. A maximum of 10 data
Instruction Manual