Herunterladen Inhalt Inhalt Diese Seite drucken

Servicing / Disassembly - Tunze DOC Skimmer 9410 Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für DOC Skimmer 9410:
Inhaltsverzeichnis

Werbung

Servicing / disassembly

Thoroughly clean the pump, the drive assembly and
the cooling duct in regular intervals, at least once a
year. In case of unfavourable conditions, such as
high lime content, a lot of mud or failures, shorter
intervals may be necessary.
Unscrew the stainless steel screw (1).
Turn the impeller cover counter-clockwise and
remove (2); completely remove and clean the air
inlet, the silencer and the strainer.
Use pliers to remove the drive assembly (3); use
pliers or a hook to take out the cooling duct (4).
Check the bearing in the pump (5); ensure good fit.
This bearing can be removed only by using a hook
(cleaning set - article No. 0220.700).
Check the bearing in the impeller cover (6); ensure
good fit.
Check the interior space of the motor block, in
particular the cooling duct (7), which should be clean
and without traces of wear.
In case of noticeable traces of wear in the motor
block or excessive play in the drive, replace the
corresponding parts (cf. List of parts).
Entretien / Démontage
Nettoyez régulièrement la pompe, l'entraînement et
le canal de refroidissement au moins 1x par an. Lors
de conditions d'utilisation sévères, par ex. une eau
très calcaire ou une forte présence de mucus, nous
conseillons des nettoyages plus fréquents.
Dévissez la vis inox (1).
Tournez le couvercle de pompe dans le sens anti-
horaire puis retirez-le (2), démontez et nettoyez
l'entrée d'air, le silencieux et la crépine.
Retirez l'entraînement avec une pince (3), retirez
le canal de refroidissement avec une pince ou un
crochet (4), contrôlez le palier au fond de la pompe
et sa bonne tenue dans le siège (5). Ce palier
peut uniquement être extrait à l'aide d'un crochet
(Cleaning Set Art. Nr. 0220.700).
Contrôlez le palier sur le couvercle de turbine (6) et
sa bonne tenue dans le siège.
Contrôler la partie interne du bloc-moteur, en
particulier le canal de refroidissement (7), il doit être
propre et sans traces d'usure.
En cas de traces d'usures avérées du bloc-moteur
et de l'entraînement, en cas de jeu trop important
dans
l'entraînement,
correspondantes, voir Liste des pièces.
remplacez
les
pièces
6

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Skimmer kit 15Hydrofoamer silence 9410.0409410

Inhaltsverzeichnis