ATTENTION: In the event of damage to the
electrical installation of the product, a trained
service technician must be called. Do not un-
der any circumstances repair it yourself.
ATTENTION: The cooling system contains
flammable coolant R290 (propane)!
ATTENTION: Emergency maintenance
and repair of the cooling system must be per-
formed by trained, authorised technicians
who are familiar with cooling and electrical
systems. The technicians should have special
training and qualification for handling flam-
mable substances in order to perform service
on coolers with R290. Follow basic regulations
and safety measures regarding servicing and
repairs!
ATTENTION: Do not use open flame and
potential sources of sparks near a cooler
using R290 coolant!
ATTENTION: After unpacking, position the
cooler so that the heat generated by the cool-
ing unit can be sufficiently ventilated.
ATTENTION: Do not place objects that
could prevent air circulation on the cooler.
ATTENTION: The device MUST NOT be used
or stored at an ambient temperature below
0 °C. The device is intended for use in normal
environments, use only under a roof protected
from rain and sunlight. Climate class N.
DANGER: Protect the cooler and electrical
connection from rain and spraying water!
ATTENTION: Never place the cooler on its
side, not even when being transported.
NOTE: In order for the device to work
correctly and at maximum output, it is im-
portant to not cover up any of the device's
vents and ensure sufficient air circulation.
5. ELECTRICAL CONNECTION:
Connect the device to a power socket in ac-
cordance with specifications on the machine
plate of the device. Electrical wiring is subject
to local regulations. If the power supply line
(cable) is damaged, it must be replaced by the
manufacturer, its service technician or similar-
ly qualified person to avoid a dangerous situ-
ation.
DANGER: Do not use or turn on the device
if the power cord is damaged!
6. TESTING:
The product is supplied in such a way that it
needs to be installed according to the instruc-
tions. It is then ready for use.
7. WARRANTY:
The device comes with a warranty in accor-
dance with general legal regulations of the
Czech Republic or in accordance with the
trade agreement. During the warranty period,
we will remedy free of charge any defects in
the product that have not been caused by ex-
cess wear and tear, improper handling, incor-
rect storage or use of the product contrary to
the instructions and its design as defined by
the manufacturer. Materials replaced during
the warranty period are our property. The le-
gitimacy of the warranty claim is always decid-
ed by an authorised service centre. Warranty
provided by a seller outside the Czech Repub-
lic is governed by an agreement between the
seller and the buyer in their mutual relation-
ship, which is not a direct relationship with
the manufacturer. The buyer is not entitled
to claim the warranty from the manufacturer.
Shipping or other costs are not covered by the
warranty.
WARNING:
Electrical devices and appliances must be
checked/inspected at a time stipulated by
applicable legislation of the country where
the device is operated. Inspection of elec-
trical wiring may only be done by a person
with valid authorisation for this activity.
Service work, provision of spare parts and
inspections are carried out by the manu-
facturer or by an authorised service centre.
EN
15