VEVOR CT-520GD Bedienungsanleitung Seite 7

iii. Keep this equipment 30cm distant from the wall.
iv. Ensure the working environment is well ventilated.
2. Safety Tips.
i. Ventilation
This equipment is small-sized, compact in structure, and of excellent performance
in amperage output. The fan is used to dissipate heat generated by this equipment
during the welding/cutting operation. Important: Maintain good ventilation of the
louvres of this equipment. The minimum distance between this equipment and any
other objects in or near the working area should be 30 cm. Good ventilation is of
critical importance for the normal performance and service life of this equipment.
ii. Thermal Overload protection.
Should the machine be used to an excessive level, or in high temperature
environment, poorly ventilated area or if the fan malfunctions the Thermal
Overload Switch will be activated and the machine will cease to operate. Under
this circumstance, leave the machine switched on to keep the built-in fan working
to bring down the temperature inside the equipment. The machine will be ready for
use again when the internal temperature reaches safe level.
iii. Over-Voltage Supply
Regarding the power supply voltage range of the machine, please refer to "Main
parameter" table. This equipment is of automatic voltage compensation, which
enables the maintaining of the voltage range within the given range. In case that
the voltage of input power supply amperage exceeds the stipulated value, it is
possible to cause damage to the components of this equipment. Please ensure
your primary power supply is correct.
iv. Do not come into contact with the output terminals while the machine is in
operation. An electric shock may possibly occur.
LOCAL DESCRIPTION
CT-520ECT-520GD is a multifunctional welding and cutting machine developed
using internationally advanced inverter technology, with three functions: argon arc
welding, manual arc welding, and plasma cutting.
- 6 -