Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Gas build up. The build up of gas can causes a toxic environment, deplete the
and the device manufacturer before going near any electric welding, cutting or
heating operation.
1. Working Environment.
i. The environment in which this welding/cutting equipment is installed must be free
of grinding dust, corrosive chemicals, flammable gas or materials etc, and at no
more than maximum of 80% humidity.
ii. When using the machine outdoors protect the machine from direct sun light, rain
water and snow etc; the temperature of working environment
should be maintained within -10°C to +40°C.
oxygen content in the air resulting in death or injury. Many gases
use in welding/cutting are invisible and odourless.
• Shut off shielding gas supply when not in use.
• Always ventilate confined spaces or use approved air-supplied
respirator.
Electronic magnetic fields. MAGNETIC FIELDS can affect
Implanted Medical Devices.
• Wearers of Pacemakers and other Implanted Medical Devices
should keep away.
• Implanted Medical Device wearers should consult their doctor
Noise can damage hearing. Noise from some processes or
equipment can damage hearing.
• Wear approved ear protection if noise level is high.
Hot parts. Items being welded/cut generate and hold high heat
and can cause severe burns.
Do not touch hot parts with bare hands. Allow a cooling period
before working on the welding/cutting gun. Use insulated welding
gloves and clothing to handle hot parts and prevent burns.
CAUTION
- 5 -
Werbung
