Gluceofine Blutzucker-Mess-System Benutzerhandbuch Seite 70

Testing Procedure with activated User Activity
Option and User ID.
CAUTION
1. If you did not activate the User Activity option and/or the User ID option, Step
4-1 and/or Step 4-2 procedures are not conducted.
2. Although User Activity option and/or User ID option are activated, if you pull
the blood glucose test strip out right after the test, you can not move on to step
4. The test result is not stored under a specific User ID and only displayed after
deactivating the User ID option.
3. Please refer to chapter "Setting Your Blood Glucose Test Meter", if you want to
set the User Activity option and User ID option.
70
Step 4-1
• If you selected to use the User Activity option
during set up, press
activity that correlates with your result (refer to
page 54), then press
• If you do not select to use user activity option
during set up, press
Step 4-2
• If you selected to use the User ID option during
setup, press and
User ID, then press
and button to select the
.
to continue to step 4-2.
button to select the correct
.