Electrical Safety Rules; Equipment Safety Rules; Application - Autool Hts705 Benutzerhandbuch

Electrical
safety rules
Equipment
safety rules

Application

This is a Class I equipment and must be powered
through an electrical outlet with a protective grounding
conductor. This connection must not be interrupted at
any point (e.g., through an extension cord). Any interrup-
tion or disconnection of the protective conductor may
result in electric shock. Therefore, ensure that the equip-
ment/casing is properly grounded beforehand.
Do not twist or severely bend the power cord, as this may
damage the internal wiring. If the power cord shows
signs of damage, do not use the dry ice blasting
machine. Damaged cables pose a risk of electric shock.
Keep the power cord away from heat sources, oil, sharp
edges, and moving parts. Damaged power cords must
be replaced by the manufacturer, its technicians, or
personnel with similar qualifications to prevent hazard-
ous situations or injuries.
Never leave the equipment unattended while it is operat-
ing. Always turn off the equipment at the main switch and
disconnect the power cord when the equipment is not
being used for its intended purpose!
Do not attempt to repair the equipment yourself.
Before connecting the equipment to power, check that
the battery voltage matches the value specified on the
nameplate. Mismatched voltage can cause serious
hazards and damage the equipment.
It is essential to protect the equipment from rainwater,
moisture, mechanical damage, overload, and rough
handling.
Before use, check the power cord, connection hoses,
and adapters for any damage. Do not operate the equip-
ment if any damage is found.
Use the equipment only in compliance with all safety
instructions, technical documents, and vehicle manufac-
turer specifications.
If additional dry ice pellets are needed, use only brand-
new and unopened products.
4