Operating Instructions; Mobile App Installation; Operation Guide - Autool Svb303 Benutzerhandbuch

OPERATING INSTRUCTIONS

Mobile app
installation
Operation
guide
● Scan the QR code to download and install the app.
● Install Phone
Adjust the knob of the phone holder and place the phone on
the holder (supports 3.5-inch to 6.3-inch screens). Connect the
phone interface to the grib's USB interface using a connect cable.
Power On/Off
●
Press and hold the [
on the device. The working indicator light will be on. Open the
application on your phone to display the image. Press and hold
the [ ] button for 2 seconds to turn off the device.
● LED Light Adjustment
After powering on, the LED light is at its brightest by default.
Press the [
3 levels, and the 4th press turns off the LED light.
● Capture/Record
Press the [
button for 2 seconds to start recording. Long-press the [
button for another 2 seconds to stop recording.
Charging
●
Use a charging cable to connect to a 5V adapter or a mobile
power source and plug it into the device's Type-C interface for
charging. The charging voltage is DC 5V. Using a higher
voltage may damage the device. Note: This device does not
support fast charging.
] button on the grib for 2 seconds to turn
] button to adjust the brightness. Brightness has
] button to take a photo. Long-press the [
9
]
]