R-Go Split Break Anleitung Seite 10

Setup Wireless
1. Turn your Break keyboard on. At the back of the
keyboard you will find the on/off switch. Turn the switch to
'on' or, depending on the version, to green.
Channel 1,2 and 3
Ch.1 Ch.2
Fn
2. Create a Bluetooth connection between the keyboard
and a device. Note that you can connect this keyboard to
a total of 3 different devices, such as your PC, laptop and
mobile phone. For the connection, you have a choice of 3
channels, or Ch1 (see F1 key), Ch2 (see F2 key) or Ch3 (see
F3 key). One device can be connected via each of these
channels.
To connect the keyboard via Bluetooth to one device, for
example your laptop, press and hold the Fn key together
with the key of the chosen channel (F1,F2 or F3) for at
least 3 seconds. It will now search for a device to connect
to. You will see the Bluetooth light on the keyboard start
flashing.
Ch.3
10