Opening The Transport Lock - JVC MC-8200LU Bedienungsanleitung

3-2. Opening the transport lock

1.
Open the door by inserting the key and turning it
counterclockwise (90°) to unlock the door.
2.
Open the transport lock of the mail slot.
• Using a philps screwdriver, continue to turn the lock
counterclockwise until the lock is completely disen-
gaged and moves outwards.
3.
Open the transport lock of the carrier.
• Continue to turn the screw counterclockwise to loosen
it until the metal device retaining it is disengaged and
moves outwards.
Note:
When using the MC-CF10U Optional Carrier, read "3-4.
Removing the optional carrier transport lock screw"
on page E13 before continuing on.
Proceed to the operation in the next page without clos-
ing the door.
• In the case of re-transporting, lock the transport lock as follows:
1) Remove all the discs and turn off the power.
2) Turn on the power while pressing the "1" of the 10-key pad and enter the PACKING mode.
3) Turn off the power as soon as the "END" display appears on the LCD screen.
4) Fix the transport lock as described in 2 and 3 above.
5) When using the MC-CF10U Optional Carrier, read "3-4. Removing the optional carrier transport lock screw" on
page E13 before continuing on.
6) Re-attach the protective transport materials. ( a See page E12.)
Unlocked
Door opening/closing
key cylinder
Locked
Lock pin
Setup