Aqua Forte Vario1.1 Gebrauchs- Und Installationsanleitung Seite 7

5.3 Speed Setting
Note: The inverter module can be operated manually or automatically at regular intervals.
The system automatically saves the 4 latest valid settings.
NO. Buttons Screen
Used
1
2
3
5.4 Timer Setting
*Overlap setting of time will be considered as invalid, the device will only run based on the
previous valid setting.
*During timer setting, if you want to abandon it, hold
1.enter timer setting
2.set current time
3.to next time
4.choose a speed range for timer 1
5.decide the specific
speed
6.repeat above steps to set other 3
timers
7.hold 3 seconds to save setting
8.check 4 timers to make sure there
is no invalid setting
All manuals and user guides at all-guides.com
When plug in, this button lights on, the device still in OFF
mode.
Press the button to unlock the screen
Press the button to start. The pump will run at a
maximum speed(2900rpm) for a one-minute
self-priming.
Use or
running speed if needed.
5
Comments
to adjust by 50RPM to a specific
for 3 seconds.