Keychron V6 Max Benutzerhandbuch Seite 20

Wired Mode:
•
To engage wired mode, move the toggle switch to the Cable setting (Note: This
function is only active when a USB cable is connected).
•
Connect the provided cable between your PC and the keyboard.
•
Once connected, the keyboard's backlight will automatically turn on, signaling active
wired mode.
Important: The keyboard remains fully operational in wired mode and will not
o
switch to battery saver mode.
Turn Off the Keyboard:
To power down the keyboard, switch to the Cable mode and then disconnect the power
cable. This ensures the keyboard is completely turned off without drawing any residual
power.
Backlight Setting:
•
Toggle Backlight: Use the combination "fn + tab" or "fn + knob (press)" to turn the
backlight on or off.
•
Switch Lighting Effects: Adjust the backlight settings by pressing "fn + Q" or "fn +
A" to cycle through different lighting effects, allowing customization according to
your preference.
Troubleshooting
If unable to pair the keyboard:
•
Ensure the device is Bluetooth-capable.
•
Restart the device and attempt pairing again with the keyboard.
•
For Windows Computers: New Bluetooth connections might need additional
software updates. Allow at least 20 minutes for updates to install after pairing, before
restarting the computer.
•
Ensure the device settings are configured to accept Bluetooth connections and that it
supports the HID profile.
20