Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PROGRAMMES
For choosing the appropriate programme for your kind of
laundry, always respect the instructions on the care labels
of the laundry. The value given in the tub symbol is the
maximum temperature possible for washing the garment.
Mixed
For washing lightly to normally soiled resilient garments in cotton, linen,
synthetic fibres and mixed fibres.
White
For washing normally to heavily soiled towels, underwear, table and bed
linen, etc in resilient cotton and linen. Only when the temperature is
selected at 90°C the cycle is provided with a prewash phase before main
washing phase. In this case it is recommended to add detergent both, in
the prewash and main wash section.
Cotton
Normally to heavily soiled and robust cottons .
Eco 40-60
For washing normally soiled cotton garments declared to be washable
at 40 °C or 60 °C, together in the same cycle. This is the standard cotton
programme and the most efficient in terms of water and energy
consumption.
! The cycle runs only at 40°C as per regulation.
Sport
For washing lightly soiled sports clothing (tracksuits, shorts, etc.). For best
results, we recommend not exceeding the maximum load indicated in
the ‚''PROGRAMME CHART'' . We recommend using liquid detergent , and
adding the amount suitable for half-load.
Duvet
Designed for washing eiderdown padded items such as double or single
duvets, cushions and anoraks. It is recommended to load such padded
items in the drum with the edges folded inwards and not to exceed ¾ of
the drum's volume. For optimal washing, we recommend using a liquid
detergent.
20 °C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
Spin & Drain
Spins the load then empties the water. For resilient garments. If you
exclude the spin cycle, the machine will drain only
Rinse & Spin
Rinses and then spins. For resilient garments.
Rapid 30'
For washing lightly soiled garments quickly. This cycle lasts only 30
minutes, saving time and energy.
Colours 15°
This cycle helps protect colours by washing in cold water (15°C) and uses
less energy to heat the water while still offering satisfactory wash results.
Suitable for lightly soiled, ustained garments. This cycle offers wash
results comparable to 40°c mixed at just 15°C
Wool
All wool garments can be washed using programme ‚"Wool" even
those carryng the "hand-wash only " label. For best results, use special
detergents and do not exceed max kg declaration of laundry.
Delicates
For washing particularly delicate garments. Preferably turn garments
inside out before washing.
Synthetics
For washing soiled garments made from synthetic fibres (such as
polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends.
FIRST TIME USE
To remove any manufacturing debris select the "Cotton"
at a temperature of 60°C. Pour a small quantity of detergent powder into
the main wash 2 compartment of the detergent dispenser (maximum
1/3 of the quantity the detergent manufacturer recommends for lightly
soiled laundry). Start the programme without adding any laundry.
DAILY USE
Prepare your laundry according to the recommendations in the "HINTS
AND TIPS" section. Load the laundry, close the door, open the water tap
and press the "ON/OFF"
button to switch the washing machine on, the
"Start/Pause"
button flashes. Turn the programme selector to the
desired programme and select any option if needed. The temperature
and spin speed can be changed by pressing the "Temperature"
button or the "Spin"
button. Pull out the detergent dispenser and
add the detergent (and additives/softener) now. Observe the dosing
recommendations on the detergent pack. Then close the detergent
dispense.
STARTING CYCLE
Press the "Start/Pause"
The machine will lock the door (
rotate; the door will be unlocked (
symbol on) as preparation phase of each washing cycle. The "Clicking"
noise is part of the door locking mechanism. Water will enter the drum
and start the washing phase once the door is locked.
PAUSE A RUNNING PROGRAMME
To pause the wash cycle, press the "Start/Pause"
will go off and the remaining time on display flash. To start the wash cycle
from the point at which it was interrupted press the button again.
OPEN THE DOOR, IF REQUIRED
After starting a programme, the "Door locked"
show that the door can not be opened. As long as a wash programme is
running, the door remains locked. To open the door while a programme
is in progress, press the "Start/Pause"
Provided the water level and/or temperature is/are not too high, the
"Door locked"
For example to add or remove laundry. Press the "Start/Pause"
again to continue the programme.
PROGRAMME END
The "Door locked"
"End". To switch off the washing machine after programme ends press the
"ON/OFF"
button, the washing machine will switch off automatically after about a
10 minutes. Close the water tap, open the door and unload the washing
machine. Leave the door ajar to allow the drum to dry.
OPTIONS
! If the selected option is incompatible with the programme set,
the incompatibility will be signalled by a buzzer (3 beeps) and the
corresponding indicator light will flash.
! If the selected option is incompatible with another previously set
option, only the most recent selection will remain active.
Clean+
Clean+ is an option working on 3 different levels (Intensive, Daily
and Fast) that are specially designed to set the right washing action,
depending on your cleaning needs:
Intensive
removing most stubborn stains.
Daily
: this option is designed to remove everyday stains.
Fast
: this option is designed to remove lightly soiled stains.
Intensive rinse
By selecting this option, the efficiency of the rinse is increased and
optimal detergent removal is guaranteed. It is particularly useful for
sensitive skin. Press the button once, two or three times to select an
additional 1
remove all traces of detergent. Press the button again to go back to the
"Normal rinse" rinse type.
Start delay
To set the selected programme to start at a later time, press the button
to set the desired delay time. Symbol
fuction is enabled. To cancel the delayed start, press the button again
until the value ‚''0'' is shown on the display.
FreshCare+
This option enhances washing performance by generating steam
to inhibit the proliferation of the main bad odour sources inside the
machine. After steam phase, the washing machine will perform gentle
tumbling through slow rotations of the drum. FreshCare+ option starts
after the cycle ends for a maximum duration of 6h and you can interrupt
programme
at any time by pressing any button on control panel or turning the knob.
(*) Wait around 5' before open the door.
Temperature
Every programme has a predefined temperature. If you want to change
the temperature, press the "Temperature"
the display.
Spin
Every programme has a predefined spin speed. If you want to change the
spin speed, press the "Spin"
Demo mode
To deactivate this function, switch the washing machine OFF. Than press
and hold "Start/Pause"
"ON/OFF"
button.
symbol on) and the drum will start to
symbol OFF) and then locked again (
to pause the programme.
indicator light goes off and you can open the door.
indicator light goes off and the display shows
button, the lights goes off. If you do not press "ON/OFF"
: this option is designed for high levels of dirtiness,
, 2
or 3
rinses after the standard cycle rinse and
+1
+2
+3
lights on the display when this
button. The value appears on the display.
button, within 5 seconds press also
button and hold both buttons for 2 seconds.
; the indicator light
indicator lights up to
button
button. The value appears on
Werbung
