Floor Nozzle - Hoover Hf1 Bedienungsanleitung

5. CLEANER MAINTENANCE

5.3 FLOOR NOZZLE

Thanks to ANTI-TWIST, your Hoover vacuum features an integrated comb which radially reduces hair wrapping
around the brushbar. However, if your cleaner is not picking up efficiently your brushbar may need to be cleaned
or there is large debris needing to be removed from inside the nozzle.
1. Ensure your product is switched off.
2. Slide the Nozzle Brushbar Release Slider on the nozzle and rotate Nozzle Brushbar Release Latch.
3. Remove Nozzle Brushbar from the Floor Nozzle.
4. Remove any excess debris from the brushbar. Check for and remove any large debris from inside the nozzle.
5. Re-insert the brushbar into the nozzle ensuring it is in the correct position and push down at the end of the
brushbar until you hear it "CLICK " to lock in position.
6. Turn the Nozzle Brushbar Release Latch to the correct position to lock it.
1
6
5. CLEANER MAINTENANCE
5.4 MINI POWER NOZZLE
1. Ensure your product is switched off,detach the mini power nozzle from your product.
2. To remove the brushbar, unlock the release latch and using scissors, remove any tangled fibres or
debris from the Brushbar.
3. Re-fit the brushbar, push and lock the release latch. Look inside the nozzle and remove any debris.
1
* Dependant on your model.
2 3
2
4
3
8
5
GB