Hoover HF1 Bedienungsanleitung Seite 9

5. CLEANER MAINTENANCE
5.5 BLOCKAGES
If your product is operating but has poor pick up this may be due to a blockage in the nozzle or the tube
or your brushbar is not rotating. If this is the case a solid red light will appear on the Battery charging
indicator. Carry out all maintenance instructions as detailed in sections, 5.1,5.2,5.3,5.4. Along with the
additional areas listed below.
1. Ensure your product is switched off.
2. Detach the nozzle, tube and handheld unit as per previous instructions.
3. Visually check the handheld inlets for any debris or obstructions and clean it.
4. Visually inspect the nozzle joints area for any debris or obstructions and clean it.
5. Remove the brushbar and check the nozzle inlet area for any debris or obstructions and clean it.
6. Visually check both ends of the tube and remove any debris or obstructions.
7. Re-Assemble your product.
6. FLEXIBLE MODE
If you want to easily access hard-to-reach areas under furniture, press the flexible tube release button
to position the tube to a lower angle.
2
1
4 5
6
7
9
GB
3