Werbung
Verfügbare Sprachen
Verfügbare Sprachen
trigger. The fan will activate if the probe's reading meets or exceeds this
trigger.
It will gradually ramp up until it reaches the ON Mode's setting. If the
probe's reading falls below your trigger, the fan will turn off. We
recommend turning this trigger OFF when not in use during set up by
holding the up and down buttons together.
You may set this trigger below the low temperature trigger to create a
range where the fan is active.
Note that this trigger can activate as long as you are in AUTO Mode,
even if you are viewing a different trigger within AUTO Mode.
AUTO MODE: LOW TEMPERATURE
In this mode, pressing the up or down button sets the low temperature
trigger. The fan will activate if the probe's reading meets or falls below this
trigger.
It will gradually ramp up until it reaches the ON Mode's setting. If the
probe's reading rises above your trigger, the fan will turn off. We
recommend turning this trigger OFF when not in use during set up by
holding the up and down buttons together.
You may set this trigger above the high temperature trigger to create a
range where the fan is active.
- 13 -
Werbung
