Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Basis functions
Switching on/off the radio set
Turn the on/off switch clockwise: A power-on beep and the announcement
(when the speech announcement is activated). Afterwards the green status LED flashes 4 x and
the channel number is announced (e.g.
For switching off the radio set, turn the on/off switch counter clockwise.
Adjusting the volume
Use the on/off switch to adjust the desired volume.
Selecting the channel
Use the channel switch to select the desired channel respectively channel with stored CTCSS/DCSS
code (see table).
When the speech announcement is activated, the selected channel is announced (e.g.
channel 2).
Table of channels
Channel number Frequency (MHz)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Transmission
For transmitting, hold the PTT button pressed and speak with normal voice level and a distance
of approx. 5 cm into the microphone. The red status LED is illuminated while transmitting. If your
message is finished, release the PTT key again.
Reception
When the radio set is switched on, it is ready-to-receive (unless the set is transmitting).
If a signal is received on the adjusted channel, the green status LED lights up.
one
1 (446,00625)
2 (446,01875)
3 (446,03125)
4 (446,04375)
5 (446,05625)
6 (446,06875)
7 (446,08125)
8 (446,09375)
1 (446,00625)
8 (446,09375)
3 (446,03125)
6 (446,06875)
4 (446,04375)
2 (446,01875)
5 (446,05625)
Scan Function
for channel 1).
CTCSS/ CDCSS Code
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
107,2 Hz/ CTCSS
110,9 Hz/ CTCSS
114,8 Hz/ CTCSS
82,5 Hz/ CTCSS
D132N/ CDCSS
D155N/ CDCSS
D134N/ CDCSS
16
sound
Power ON
for
two
Werbung
