used for a prolonged period.
ATTENTION: Damage to the product
•
Only use the specified type of battery/rechargeable battery.
•
Insert batteries according to the polarity markings (+) and (-) into the
battery/rechargeable battery and the product.
•
Clean the contacts on the battery/rechargeable battery and in the
battery compartment with a dry, lint-free cloth or cotton swab before
inserting them.
•
Remove discharged batteries/rechargeable batteries from the product
immediately.
Hanging the product safely on the wall
The product is not designed for use in rooms with high humidity (e.g., ba-
throoms). Before mounting to the wall, make sure that there are no gas, wa-
ter or electricity lines at the drilling location. Use suitable screws and dowels
(not included in the package contents). Be mindful of the wall's condition.
The manufacturer assumes no liability for damage caused by improper
fastening. Make sure that:
•
no direct heat sources (e.g., heaters) affect the product;
•
it is not placed in the path of direct sunlight;
•
contact with spraying or dripping water is avoided;
•
the product is not mounted in the immediate vicinity of magnetic fields
(e.g., loudspeakers);
•
no foreign bodies can enter the product;
•
candles and other open flames must be kept away from this product at
all times to prevent the spread of fire.
Setting up the product
Using the correct polarity, insert a 1.5 V AA R6/LR6 battery into the
battery compartment on the back of the product.
Setting the time
Use the dial on the back of the product to set the time.
Thermometer
Your product has an analogue temperature display
(TEMPERATURE).
The measuring range of the temperature is between -20 – 50 °C.
- 7 -