Herunterladen Inhalt Inhalt Diese Seite drucken

Watercool HEATKILLER IV Montageanleitung Seite 3

Vorschau ausblenden Andere Handbücher für HEATKILLER IV:
Inhaltsverzeichnis

Werbung

ausgebaut werden. Für weitere Montage-
vorgänge ist dies nicht mehr notwendig.
Weitere Informationen zur Demontage
des Kühlers, zur Demontage des Mainboards
3
und zum Gehäuse entnehmen Sie bitte den
jeweiligen Anleitungen.
3. Hinweise zur Ausrichtung des
HEATKILLER® IV
Beim
HEATKILLER®
vorgeschriebene Ausrichtung. Die vertikale
Ausrichtung steht fast immer zur Verfügung.
Ob eine horizontale Ausrichtung möglich ist,
hängt vom Sockel bzw. vom Mainboard ab.
Die Ausrichtung des Kühlers hat kaum
Auswirkung auf die Leistung des Kühlers. Die
Ausrichtung darf daher frei gewählt werden
Bei den INTEL Sockeln 1150, 1155, 1156
sowie bei AMD Sockeln ist in der Regel nur
die vertikale Ausrichtung möglich.
Bei der Entwicklung des HEATKILLER® IV
wurde auf eine leichte Entlüftung in allen
Einbaulagen geachtet. Bei der in Tower PCs
üblichen vertikalen Einbaulage lässt er sich
jedoch besonders einfach bei gedrehter
Ausrichtung entlüften (Logo unten rechts).
IV
gibt
es
keine
See
for
additional
disassembly of heat sink and mainboards in
the corresponding manuals.
3. Important information on the
alignment of the HEATKILLER® IV
The HEATKILLER® IV has no predefined
orientation on the CPU. Depending on the
mainboard layout, all four facings should be
possible. Those are: logo left (vertical), logo
right (vertical), logo on top (horizontal) and
logo at the bottom (horizontal).
The alignment of the cooler has almost no
impact on cooling performance and may be
chosen freely if installation is possible.
On INTEL Sockets 1366, 2011, 2011-3
and 2066, all four alignments should be
possible on any mainboard.
On INTEL Sockets 1150, 1155 and 1156,
horizontal alignment is usually not possible.
Only few mainboards are compatible.
On AMD Sockets the mainboard designs
allow vertical installation only.
The HEATKILLER® IV was developed to
ensure easy ventilation during all installed
alignments. When mounted in a regular tower
case, the easiest way for maintenance
ventilation is to turn the cooler so that the logo
faces down right (4 o'clock).
information
on

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis