Autool EM365 Bedienungsanleitung Seite 14

Overcurrent Protection Prompt: When using a 220V/50Hz
●
power supply, if the input current exceeds 20A and remains for
5 seconds, an overcurrent protection alarm will be triggered.
When using a 110V/60Hz power supply, if the input current
exceeds 13A and remains for 5 seconds, an overcurrent
protection alarm will be triggered. Stop using the device,
restart the charging process. If the overcurrent protection
alarm persists, do not continue using the device and contact
our after-sales service (Non-standard detection function).
● Output Overvoltage Prompt: When the charging voltage
exceeds 19.0V, an output overvoltage alarm will be triggered.
Stop charging and restart the charging process. If the output
overvoltage alarm persists after restarting, do not continue
using the device and contact our after-sales service.
Output Overcurrent Prompt: In programming power mode, if
●
the current exceeds 155A, in forced start mode, if the current
exceeds 405A, or in fast charging mode, if the current exceeds
105A, an output overcurrent alarm will be triggered. Stop
charging and check if the battery is functioning normally. If the
output overcurrent alarm persists after restarting the charging
process, do not continue using the device and contact our
after-sales service.
Undervoltage Protection
Overcurrent Protection
Excessive Output Voltage
13