Electrolux SANTO C 4 18 40-6i Benutzerinformation Seite 38

38
Installation
5. Remove the correct part from the hinge
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in op-
posite case.
6. Attach the covers (C, D) to the lugs and
the hinge holes.
Install the vent grille (B).
Attach the hinge covers (E) to the hinge.
7. Connect the appliance laterally to the
kitchen furniture sidewall:
a) Loosen the screws of the part (G)
and move the part (G) till the fur-
niture sidewall.
b) Tighten the screws of the part (G)
again.
c) Attach the part (H) to the part (G).
C
D
E
E
B
G
H