Ventilation Requirements; Installing The Appliance - Electrolux SANTO C 4 18 40-6i Benutzerinformation

36
Installation
6. Loosen and remove the lower pin.
On the opposite side:
1. Tighten the lower pin.
2. Install the lower door.
3. Tighten the middle hinge.
4. Install the spacer.
5. Install the upper door.
6. Tighten the upper pin.

Ventilation requirements

The airflow behind the appliance must be suffi-
cient.

Installing the appliance

CAUTION!
Make sure that the mains cable can move freely.
Do these steps.
1. Install the appliance in the niche.
Push the appliance in the direction of
the arrow (1) until the upper gap cover
stops against the kitchen furniture.
Make sure that the distance between the
appliance and the cupboard front-edge
is 44 mm.
Push the appliance in the direction of
the arrow (2) against the cupboard on
the opposite side of the hinge. Make sure
that the clearance between the appli-
ance and the cupboard is 4 mm.
min.
50 mm
200 cm
2
min.
200 cm
2
2
1