EDIFIER S3000 Pro Bedienungsanleitung Seite 9

The active speaker (R) and passive speaker (L) have been paired before leaving the factory. The wireless connection
will resume automatically when both speakers are powered on and the red indicator on the passive speaker is lit.
If the wireless connection fails to resume, please follow the steps below to re-pair.
1. Power on the active speaker, then press and hold the "Pair" button on the back panel of the active speaker (R),
the current mode's LED light in the display window will blink rapidly;
2. Press and hold the "Pair" button on the back panel of the passive speaker (L), the red indicator on the passive
speaker (L) will blink rapidly.
3. Wait until the red indicator on the passive speaker (L) is lit constantly. Then the pairing is complete and wireless
connection is made.
Note:
If the red indicator on the passive speaker (L) is in a breathing pattern, it indicates that there is no connection or the
connection is unsuccessful, please repeat the above steps.
Connection
English
8