EDIFIER S3000 Pro Bedienungsanleitung Seite 18

Troubleshooting
If speaker is connected to PC by a USB audio cable:
a. If the PC is using Windows operating system, please confirm that the special USB driver for S3000 Pro has been
installed; if not please download and install the driver.
b. For Windows users, please open "Device Manager" to check if there is USB device listed as "EDIFIER S3000 Pro"
or "XMOS USB Audio"; if not, you may need to install the special USB driver program of S3000 Pro or re-start PC.
For Mac users, please open "System Preferences" → "Sound" Tab, to check if there is audio output device
enumerated as "EDIFIER S3000 Pro".
c. Please confirm whether the speaker is set as the audio output device.
For Windows users, please open "Control Panel" → "Sound" → "Play" → "Set as Default" Tab to set
"XMOS USB Audio" as the current audio output device.
17
English
Sound
Play Record Sound Communication
Select the follow player to change setting
Speaker
2-XMOS USB Audio
Default device
Configuration Set as Default Properties
Confirm Cancel Apply