Portable Power Supply - Recharge - Less Visiaid Bedienungsanleitung

Portable Power Supply - Recharge

Insert your country plug adapter into the provided charger (Picture D).
1. Connect the Portable Power Supply to the charger with the included adaptor (Picture E).
2. Charge the Portable Power Supply by plugging it into the wall. If the battery were fully depleted,
it takes about 3 hours to fully charge it.
3. Unplug the Portable Power Supply from the wall saving the adaptor with the charger for re
using when you run out of battery.
When not in use, the battery discharges by approximately 1% of its capacity per day.
Therefore, after an extended period of non-use, it is recommended to fully recharge the battery.
For battery replacement, please contact the retailer where the VisiAid was purchased.
D E
9