LESS VisiAid Bedienungsanleitung Seite 14

Protecting the VisiAid, the Portable Power Supply and Table Top Power Supply.
• Do not expose any of them to extremely hot or cold temperatures.
• Extreme temperatures can cause deformation of the device components and reduce the charging
capacity and life of the VisiAid, Portable Power Supply and Table Top Power Supply.
• Never use damaged battery power supplies.
The fiber must never be disconnected from the control case or cut. In the case of fiber
breakage, the laser source will automatically shut down. The power supply must then be
switched off and the device returned to the reseller.
Keep the device dry
• Moisture and all types of liquids can damage parts of the device or the electronic circuits.
• Do not turn the device on if it is wet.
Do not use or store the device in dusty or dirty areas.
• Dirt may cause the device to malfunction.
Do not store the device on sloping surfaces.
• The device may fall and be damaged.
Do not store the device in areas that are too hot or cold.
• The device can explode if left inside a closed vehicle or in other closed environments where high
temperatures are reached.
• Do not leave the device in direct sunlight for long periods of time (for example, on the dashboard
of your car).
Do not drop or hit the device.
• If it is bent or deformed, the device may be damaged and the internal components may not work properly.
Do not point the light towards the eyes of people or animals.
• Pointing the light close to the eyes may cause a temporary loss of vision and/or injury
to the eyes.
• Never look directly at the light source.
14