Portable Power Supply - Set Up; Using Visiaid - Less Visiaid Bedienungsanleitung

Portable Power Supply - Set Up

1. Insert the Control Case into the Portable Power Supply until you hear a click observing that the
power button is on the left side (Picture F).
2. Connect the cable of the Portable Power Supply to the Control Case through the gray hexagonal
hole (Picture G).
3. Clip-on the Portable Power Supply onto your belt or trousers.
F F
If the light blinks, it means the battery is nearly depleted. Recharge the Portable Power
Supply (page 9).
You can use the Portable Power Supply for a duration ranging from 1 hour 30 minutes to
6 hours depending on the selected intensity.

Using VisiAid

1. Set up: Fit the VisiAid ultra bright illuminating frame over your prescription glasses (Can also be
wear without glasses).
2. Switch On/Off : Click the button once to turn the VisiAid on and again to turn it off . You will hear a
click when correctly pushed (Picture H).
3. Intensity selection: Turn the button anti-clockwise to increase or clockwise to decrease
the intensity of the illumination (Picture H)
G G
10