Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HAZARD! Do not place the carafe and base in the dishwasher or
immerse them in liquids.
IMPORTANT NOTE
or abrasive detergents for cleaning.
3. Storage
Leave the appliance to fully cool before stowing it or winding the power cord.
When the appliance is not being used, the power cord must be wound up in its dedicated housing under the
appliance.
Check that all the parts are clean and dry before putting them away.
Never stow the appliance while it is still wet.
It is recommended to store the appliance in a dry, clean place far from moisture and dust.
TROUBLESHOOTING
Problem
The appliance does not
switch on
The appliance is not
producing any froth.
The appliance is not
producing enough froth.
The frothed milk burns.
The problem
is not
solved.
Do not use chemical detergents, steel wool
:
Cause
a)
The appliance is not connected to
the mains.
b)
The appliance is not properly
positioned on the base.
c)
The temperature of the appliance
is too high.
The milk frothing accessory is not
properly inserted.
The milk frothing accessory is damaged. Replace it.
There is something inside the carafe
preventing the accessory from rotating
to froth the milk.
The milk has expired.
a) There is too much or too little milk.
b) The carafe is reused without being
cleaned.
The milk is too hot.
Solution
a) Insert the plug again or use a
different socket.
b) Lift the carafe and properly
insert it in the power base.
c) Rinse the inside of the appliance
with cold water to lower the
temperature.
Check
that
the
accessory is properly positioned.
Remove any obstructions inside the
carafe.
Check that the milk is fresh.
a) Check that the volume of milk is
between
the
minimum
maximum capacity.
b) Always clean the carafe after
each use.
Repeat the cycle using refrigerated
milk.
Contact your retailer or
customer support.
milk
frothing
and
20
Werbung
