Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Numark
USB
OPERATION
The M6 USB is equipped with a USB port which allows you to play content from your computer through the
mixer, or record audio from the mixer directly into your favorite software application.
your mixer works with your computer just like a standard USB sound card.
class-compliant, so there are no special drivers or software to install; simply connect a USB cable from the
USB port to your computer and you are ready to go!
UDIO
SETU
The M6 USB is a class-compliant
any
digital
audio
workstation
supports USB audio.
To enable your M6 USB to send and
receive
audio
to
and
from
instructions below for your computers operating system:
WINDOWS
7:
Use the included
cable to connect
computer.
2
Go to Start
Menu
Control
Sound
Sound.
Click the Playback tab and select USB Audio Codec*
3
as the
default
device.
4
Click the Recording tab and select USB Audio Codec'
as the default
device
Click Properties in the lower right-hand corner.
5
6.
In the new window,
click the Advanced
channel,
16-bit,
44100 Hz (CD Quality)
format.
7
Uncheck
both boxes
under
Click
the
Levels
tab and
set
8
Click 0K to close the Properties
9
Click 0K to close the Sound control panel.
10
WINDOWS
VISTA:
Use the included
cable to connect
computer.
Go to Start Menu
Control Panel
2
View, and the Sound
Control
3.
Click the Playback
tab and select USB Audio
Click the Recording
tab and select USB Audio Codec* as the default device.
4
Click Properties in the lower right-hand corner.
5
In the new window, click the Advanced
6.
the default
format.
Uncheck
both boxes
under
7
Click 0K to close the Properties
8
9.
Click 0K to close the Sound control panel.
WINDOWS
xp:
Use the included cable to connect the M6 USB to your computer.
Go to Start
Menu
Control
2
Click the Audio
tab
3
Under Sound Playback and Sound Recording, select USB Audio Codec' as the default device.
4
5
Click
0K.
MAC:
Use the included cable to connect the M6 USB to your computer.
Go to Applications
Utilities
2
In the Audio Devices tab under System Settings, select USB Audio Codec* as your Default Input
3.
and Default Output.
4
Close
the
window.
device that can be used with
or
recording
software
that
your
computer,
follow
the
the M6 USB to your
Panel
Hardware
and
tab and select
2-
as the default
Exclusive
Mode.
the slider
to "4."
window.
the M6 USB to your
Sound.
(If you don't see Sound, select Switch to Classic
Panel should become avai able.)
Codec* as the default device.
tab and select 2-channel,
Exclusive
Mode.
window.
Panel
Sounds
and Audio
Audio MIDI Setup.
6
The USB interface on
In addition, the USB interface is
Be sure your audio software program is
set up to receive audio via the M6 USE.
This
can
usually
be
done
software's
"Preferences"
or
Setup. " Please consult your software
manual
for more
information.
* If you have other USB audio devices
connected
to your computer,
have identical names, you may need to
try selecting each one until the M6 USB
is recognized.
If you
experience
too much
after
adjusting
your
software
settings,
we
recommend
AS104ALL
(Audio Stream Input/Output)
driver
for
PC
at
www.asi04all.com.
ASIO
drivers
generally
perform
and with lower latency since they create
a
more
efficient
communication
between
audio
devices
and
software.
16-bit,
44100 Hz (CD Quality)
Devices
in
your
"Device
which may
latency
latency
the
free
better
as
Werbung
