Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TOP
PANEL
FEATURES
POWER
LED
-
Illuminates
mixer
is on.
2.
INPUT
SELECTOR
- selects
source to be routed to the corresponding
channel.
Input jacks are located on the
rear panel.
3.
CHANNEL
LEVEL
INDICATOR
Displays
the
audio
corresponding
channel.
4
CHANNEL
GAIN - Adjusts the channel's
pre-fader and pre-EQ gain level.
CHANNEL
TREBLE
- Adjusts
5
(treble) frequencies
of the corresponding
channel.
CHANNEL
MID — Adjusts the mid-range
6
frequencies
of
the
channel.
CHANNEL
BASS
Adjusts
7
(bass) frequencies
of the corresponding
channel.
CHANNEL
CUE — Sends pre-fader audio
8
to
the
Cue
Channel
monitoring
CHANNEL
FADER
- Adjusts the audio
9
level on the corresponding
CF ASSIGN — Selects which input channel will be heard when the crossfader
10.
knob. All channels not assigned will remain active.
11
CROSSFADER
— Blends
crossfader.
Note: The crossfader is user-replaceable if it should ever wear out. Simply remove the facepanel, then
remove the screws holding it in position. Replace the fader with a quality authorized replacement from
your local Numark retailer only.
12.
CF SLOPE — Adjusts the slope of the crossfader
(mixing) or to the right for a sharp cut (scratching)
13
HEADPHONES
—Connect your 1/4" headphones
14
CUE GAIN —Adjusts the audio level of the Cue channel.
15
CUE MIX / SPLIT —When this switch is in the SPLIT position, the headphone
that all channels
sent to CUE are mixed to mono and applied to the left headphone
Program mix is mixed to mono and applied to the right channel. When the switch is in the MIX position,
Cue and Program audio will be "blended" together.
16
CUE MIX —Turn to mix between Cue and Program in the Headphone channel. When all the way to the
left, only channels
routed to CUE will be heard. When all the way right, only the Program mix will be
heard
17
MIC I INPUT —Connect a microphone
MIC GAIN —Adjusts the audio level of the microphone signal.
18
MIC TREBLE
—Adjusts the high (treble) frequencies
19
Tip: If you experience
feedback
frequencies.
MIC MID —Adjusts the mid-range frequencies of the microphone channel.
20.
21
MIC BASS —Adjusts the low (bass) frequencies
MIC ON / OFF —Turns the microphone
22
Channels
1-4 to -12dB (an appropriate
MASTER FADER - Adjusts the output volume of the Program mix.
23.
STEREO LEVEL INDICATOR
24.
MONO / STEREO —Adjusts the Program mix for stereo or mono operation
25
26
BALANCE - Adjusts the balance of right to left audio in all outputs (MASTER, RECORD, and ZONE
OUTPUTS)
27
BOOTH VOLUME —Adjusts the Booth output level.
when
the
the input
@0000
level
of
the
23
the high
corresponding
the
low
for
headphone
channel.
audio between
the channels
curve.
to this output for cueing and mix monitoring.
to this input with an XLR cable
of the microphone
when using a microphone
of the microphone
input on or off.
'talkover"
level)
- Displays the audio level of the Program mix.
5
Numark
2
2
2
0 00
o
O
o
o
o
O
O
o
O
Q
O
Q
1
10
10
is moved towards this
assigned
to the left and right side of the
Flip switch to the left for a smooth fade
audio will be "split" such
channel and the
channel.
at loud levels, try turning down the high
channel.
'TALKOVER"
reduces the combined
2
1
M6 use
levels of
Werbung
