Trust MATTER & START-LINE SMART MACM-250 Bedienungsanleitung Seite 15

OPTIONAL: RESET START-LINE MEMORY WITH REMOTE CONTROL
Warning: This step will delete all paired Start-Line transmitters from the memory of the built-in dimmer.
(Matter will not be reset)
Shortly press the "FUNCTION" button to activate pairing mode. Pairing mode will be active for 12 seconds
A
and the LED indicator on the built-in dimmer will flash green.
While pairing mode is active (within 12 sec) send a GROUP OFF signal with the connected Trust Switch-in
B
transmitter. (If necessary, consult the transmitter manual).
The connected lighting will go ON-OFF-ON-OFF to confirm the reset.
C
MACM-250 MATTER & START-LINE SMART BUILT-IN DIMMER
EN
15