Werbung
Verfügbare Sprachen
Verfügbare Sprachen
For more detailed
FAQs, please
Feedback"-•Battery Camera'
The device prompts offline?
1. Check whether the equipment is in the power-on state, and observe whether
the working light Of the equipment is on normally.
2. Check whether the Wi-Fi network is in good condition and restart the router.
3. If the device is located far away from the router, which results in the inability to
obtain a good Wi-Fi signal, it is recommended
place or add a Wi-Fi amplifier to improve the Wi-Fi performance
4 Delete the camera from your ieGeek Cam account and add it again after
resetting the device.
Check whether the device firmware and application
version.
Update router or Wi-Fi password?
Delete the camera from your ieGeek Cam account. After resetting the device, use
the new Wi-Fi and password
Can't play historical video?
1. Check the status Of the SD card in "Settings • to ensure that the SDcard has
been successful y recognized.
2. Reinsert
the
SD card.
3. In the application,
4 Try another new SDcard.
Alarm push frequently?
l. In the app, lower the sensitivity of the motion detection alarm.
2. Check whether
there are objects
•n the field of view of the device, such as the outdoor
driving cars, passing pedestrians, etc. The angle Of the device can be adjusted
appropriately
to avoid these easily disturbing objects
3. Turn on 'detection" and use humanoid algorithm to filter useless alarms.
The phone cannot receive the alarm push?
1. Turn on all the push permissions Of the "ieGeek Cam" application
settings Of your mobile phone.
2. Make sure that the device's motion detection function is successfully turned on.
3 Restart the phone, and clear the cache
4. Check whether the network is good.
06 / FAQs
log •n to the APP, search in
to add it again.
format
the SD card.
that interfere
to move the router to a closer
program are the latest
with and trigger
unit of the air conditioner,
on Android
phones.
10
&
Of the home.
the PIR sensor
in the system
Werbung
