Midea INNERCHEF Serie Bedienungsanleitung Seite 11

2 According to different configurations install the barrel assembly (Figure 2), then push
it into the Main unit (Figure 3).
3 Before placing ingredients, preheat the machine for 3-5 minutes, the cooking
effect will be better.
Instructions
1. After the machine is powered on, adjust the temperature knob to the 200°C
position and the time knob to 3-5 minutes to complete the warm-up operation of
the machine.
2. After the preheating is completed, hold the top of the machine with one hand, and
pull the barrel out by holding the handle of the barrel with the other hand. The barrel
must be placed on a stable table.
3. Put the ingredients on the bakware in the fried barrel.
4. Push the fryer into the machine, select the corresponding cooking temperature and
time by the knob, and cook and heat the ingredients.
Note: When the drum is not fully advanced, the micro-switch is not triggered, the
machine is in the state of power off the barrel, and it will not work. At this time, you
only need to fully push the drum.
Figure 2
Figura 3
08
EN