Operation - Renkforce M910BU Bedienungsanleitung

Operating instructions
USB mouse M910BU
Item no. 1407918
Intended use
This USB mouse is designed for right-handed people and features 9 individually programmable
buttons and 2 scrolling wheel functions. Additional software is required to program the buttons
and is included with the product. The mouse is designed for computers running the Windows
operating system.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuits or fire. Read the instructions
carefully and keep them. Make this product available to third parties only together with its
operating instructions.
This product complies with the statutory national and European requirements. All company names
and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Mouse
• Driver CD
• Operating instructions
Up-to-date Operating Instructions:
1. Open www.conrad.com/downloads in a browser or scan the displayed
QR code.
2. Select document type and language and enter the item number into the
search field. After submitting the query you can download displayed
records.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in this manual, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• It is intended for indoor use only. Do not use it outdoors. Contact with moisture,
e.g. in bathrooms, must be avoided under all circumstances.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Make sure that the cable is not squeezed, bent, damaged by sharp edges or put under
mechanical stress.
• Arrange the cable so that it will not become a trip hazard.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Operating elements
1
2
3
4
5
®
1 Sensitivity button
2 Scrolling wheel (with button)
3 Right button
4 Left button
5 USB cable
6 Internet button
7 Sensor
The buttons functions are highlighted in bold throughout this manual. However, the buttons are not
labelled on the product. The button functions are based on the factory settings and can be changed as
desired after installing the driver.

Operation

a) Connection and setup
Place the mouse on a smooth, flat surface of a sufficient size. The mouse's motion
detector may not work on all surfaces, especially reflective surfaces or glass.
If the mouse pointer does not move, try placing the mouse on a suitable mouse pad.
1. Connect the USB plug on the mouse to a USB port on your computer.
2. The operating system will recognise the mouse as new hardware and install the necessary
drivers (see section "c) Plug & Play"). These are included with the operating system.
b) Hand rest
Place your hand on the hand rest (10) when using the mouse. The hand rest can be removed:
Proceed as follows:
To remove:
House the mouse in place and pull the hand rest backwards off the mouse.
To attach:
1. Insert the two clips on the hand rest into the holes on the bottom of the mouse.
2. Slide the hand rest in the direction of the cable until it clicks into place.
c) Plug & Play
You can use the mouse as a normal mouse without installing the driver (Sensitivity button (1),
Left button (4), Right button (3), scroll wheel (2)). Windows
automatically.
Configure the mouse settings (such as the speed of the mouse pointer) in the settings for your
operating system.
The driver must be installed to program the mouse buttons and configure other settings.
d) Weights
Three weights are built into the mouse's housing to give the mouse stability and centrifugal force
when moved. Weights can be removed or inserted to suit different usage scenarios. Proceed as
follows to remove or insert weights:
1. Turn the mouse upside down.
2. Open the round cover on the weight compartment (8) in the direction of the arrow.
3. Remove the cover and then remove the weights from the slots (or insert weights into the slots).
4. Replace the cover. Note that the cover can only be inserted in one orientation.
e) Installing the driver
Important! Ensure that the mouse is connected to your computer before installing the
driver.
1. Insert the driver CD into the DVD drive on your computer.
2. Navigate to your DVD drive and open the 'Setup.exe' file on the driver CD.
3. Follow the on-screen installation instructions to complete the installation.
Settings
The mouse's buttons can be programmed using the driver's user interface. Search for 'Gaming
Mouse Driver' in your list of computer programs and then open it.
You can also launch the user interface via the taskbar. Double click on the mouse symbol to open the
user interface. The mouse symbol is only displayed when the user interface is running.
Close the user interface via the taskbar as follows: Right-click on the mouse symbol and then select
'Exit'.
8 Weight compartment
9 Volume down button
10 Hand rest
11 Volume up button
12 Back button
13 For button
will install the necessary drivers
®
13
12
11
10
9
8
7
6