Operation - Renkforce RF-GM-PR01 Bedienungsanleitung

Operating instructions
RF-GM-PR01 GAMING MOUSE
Item no. 1620175
Intended use
The gaming mouse is designed to operate a computer. It features eight buttons and a clickable
scroll wheel. The input commands are transmitted to a receiver, which connects to a USB 2.0
port on your computer. The enclosed software is used to set and personalise the various mouse
parameters and the button assignments.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using
the product for purposes other than those described above may damage the components. In
addition, improper use can cause hazards such as a short circuit or fire. Read the operating
instructions carefully and store them in a safe place. Only make this product available to third
parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Mouse
• Software CD
• Operating instructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR
code on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol alerts the user to the presence of important tips and notes on
using the device.
Safety instructions
Read the operating instructions and safety information carefully. If you do
not follow the safety information and information on proper handling in these
operating instructions, we will assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety information and operating instructions of any other
devices which are connected to the product.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
• Maintenance, modifications and repairs must be carried out by a technician or a
specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Attention, invisible laser light at the optical sensor:
- Do not look into the beam directly or with optical instruments!
Product overview
1 "Back" button
2 Resolution button
6
3 "Forward" button
5
7
4 Scroll wheel (with button functionality)
4
5 Left mouse button
3
8
6 USB connection cable
2
1
9
7 Right mouse button
8 Increase the volume
9 Decrease the volume

Operation

a) Connecting the mouse
• Connect the mouse with the USB cable (6) to a free USB port on your computer.
• The operating system will automatically search for and install the required drivers. The
mouse is now ready to use.
b) Using the mouse
• The button functions are preconfigured by default. You can use the scroll wheel (4) and the
right (7) and left (5) mouse buttons with the same default settings as other commercially
available mice.
• Press the resolution button (2) to switch between the resolutions of the mouse. The colour
scheme of the mouse illumination shows the setting of a different resolution.
• A small chamber is located on the base of the mouse. Open the round cover by turning. You
can change the weight of the mouse to suit your preferences by removing and reinserting
the weights. The six cylindrical individual weights are magnetic in order to prevent them from
falling out easily. Store any weights you remove safely.
• Configure the mouse using the accompanying software. Assign functions to the buttons of
the mouse according to your preferences. You can change the button settings using the
accompanying software and user profiles.
c) Installing the software
Ensure that the mouse is connected to your computer before installing the software.
• You must have administrator rights to carry out installation. Insert the CD for the mouse
function setup program (enclosed) into a CD ROM drive that is connected to your computer.
• Click on the installation file for the setup program to install it. Follow all the on-screen
instructions.
• Restart your computer to complete the software installation.
d) Personalising and configuring the mouse
• You must have administrator rights to use the software. Open the 'Ultimate Gaming Mouse
Driver' software to configure the mouse according to your preferences.
• You can personalise up to five different configuration profiles. To define a profile, select the
profile (1 to 5) by clicking on it. You can load predefined, stored profiles (click on 'Load
Profile') or save self-defined profiles (click on 'Save Profile').
• Click on the corresponding setting button in the upper menu bar to configure the setting
parameters for a profile. The following setting categories are available for each profile:
- Light setting
- Sensitivity
- System setting - button behaviour
- Advanced setting
- Button setting - button assignment (including macros)