EDIFIER Comfo Flex Bedienungsanleitung

Comfo Flex
EN 1. Power ON/OFF
Open or close the case to power on/off.
2. First pairing
1. Once powered on, the earbuds will automatically enter Bluetooth
pairing mode.
2. Select "EDIFIER Comfo Flex" from your device list to connect.
3. Pairing for new device
1. Place the earbuds in the case and keep it open.
2. Press and hold the button on the case for 3s until white and
orange LED blink.
Note: For subsequent use, the earbuds will automatically connect
to the device used last time.
4. Reset
1. Place the earbuds in the case and keep it open.
2. Press the button on the case 3 times, white LED will blink until the
reset is complete.
5. Multipoint connection
①
②
③
1. Pair device A with the earbuds manually and keep the earbuds in
the case.
2. Re-enter Bluetooth pairing and select "EDIFIER Comfo Flex" in
device B settings to connect.
3. Select "EDIFIER Comfo Flex" again in device A settings to complete
the multipoint connection.
Note: For subsequent use, the earbuds will automatically reconnect
to the two devices used last time.
6. Controls
Call
●
Music
●
Note:
1. "x2" double tap; "x3" triple tap; "—" press and hold;
2. Download EDIFIER ConneX App to customize more control settings.
7. Charging
Input: 5V 200mA (Earbuds)
Note: Make sure the USB port is completely dry before charging.
Open-ear True Wireless Earbuds
Manual
x3
Bluetooth
EDIFIER Comfo Flex
A
L
x2
x2
x3
L
x2
x3
Bluetooth
EDIFIER Comfo Flex
3s
3s
R
x2
x2
x3
R
x2
x3
5V 1A (Charging case)
Bluetooth
EDIFIER Comfo Flex
Bluetooth
EDIFIER Comfo Flex
A
B