Reolink NVR Bedienungsanleitung Seite 6

Add the NVR to Reolink
Please download and install the client software
https://reolink.com/software-and-manual.
O
I. Click "Add Device" on the right-side menu.
2. Choose "UID" as the Register Mode.
3. Enter the UID of the PoE NVR.
4. Create a name for the POE NVR system displayed on Reolink Client.
5. Input the password of this NVR system created on Reolink App or on NVR.
NOTICE: There is no password bg default.
or on NVR, you need to use the password you've created to log in.
6. Click "0K" to log in.
9 English
Client
from our official website:
If UOU've already created a password on the mobile App
Mounting
Lighting
• For best monitoring, do not mount the camera towards a light source.
• Pointing the camera towards a glass window
poor image because of glare and lighting conditions inside and outside.
• Mount the camera towards a glass window
glaring lighting conditions outside.
• Don't place the camera in a shaded area that is pointing into a well-lit area as this
will result in a poor display. The light to the sensor located
needs to be the same as the light at the focal target
• As the camera uses infrared LEDs to see at night, it's recommended
from time to time in case the picture degrades.
Environment
• Make sure the power connections are not directly
not be blocked blJ other outdoor elements.
• Weatherproof only means that the camera can be exposed to weather such as rain
and snow. Weatherproof cameras cannot work underwater.
• Do not expose the camera to places where rain and snow will hit the lens directly.
• Cameras geared for cold weather may work in extreme conditions as low as -25 oc
because heat will be produced when plugged
Tips
intending to see outside mau result in a
mau result in a poor image because of
at the front of the camera
for best results.
to clean the lens
exposed to water or humidity and
in.
English 10