Reolink NVR Bedienungsanleitung Seite 4

Set up POE System on Monitor
During the startup, the splash screen will show up. Please
wait until the wizard interface appears on the monitor
set the password (for the initial access).
English
5
step 3
Connect your cameras to the POE
ports of the NVR.
Step 4
Connect the NVR to the power
outlet and turn on the power
switch.
and
Follow the setup wizard to set up the NVR bg
clicking "Next", and then click "Finish" to save
the settings.
Wizard Setup
• Create a password using at least 6 characters.
• Set up general configurations and check the UID.
NOtjG'YOU can skip some steps to finish the
wizard and configure them later.
Setup Wizard
Pleasecreate c password using at least 6 charoters,
User Nome
admin
Password
Confirm Password
Level
Admin
Enable Password
Display W izard When bcctingup
Next
English 6