Troubleshooting:
The air supply is inadequate:
• Listen to try and detect where the air is escaping.
applied to all hose connection
is escaping at these points. Tighten the connection parts firmly.
• Teflon adhesive tape should be applied to all connection points at risk.
• Replace the air hose if it is torn or damaged.
The compressor
deactivates frequently,
hotter than normal during operation:
• Remove
other
units connected
• Do not use any extension cable.
Please consult your specialised
problem yourself. Incorrect use or dismantling Ofthe unit can lead to compressor damage.
Charger:
Safety
instructions:
• bonotusethecharger outdoors.
• The unit is ONLY suitable for rechargeable NiMH batteries.
• Ensure that the charger is connected correctly to the AC socket.
• Remove the charger immediately from the socket if you notice anything unusual.
• The battery is Old or damaged if the lamp flashes red for over 5 minutes. Remove the charger from
the socket and disconnect the battery from the charger.
• Incorrect handling can lead to damage to the charger or hazards for the user.
Technical
data:
• DC-25X
• Input: 100-240 V AC/ 50-60 Hz
• Output: 24 V DC
• Battery box: 10 cell NiMH Batteries
• Charging with electric current: 500 A
• Operating temperature: 0-35
A soap and water solution
points with a brush. Bubbles which form are an indication
the motor cannot reach its full performance
to the same
socket.
dealer or the manufacturer
C
should otherwise
of the unit if you cannot solve a technical
be
that air
level or becomes
13
13