Sparmax DC-25X Bedienungsanleitung Seite 12

7
8
12
12
• Alternatively, insert the plug at the end of the
battery box connection cable into the power
pack / battery input Ofthe compressor (Fig. 5).
The battery should be completely
enable the unit to reach its full performance
• Remove the cover from the battery holder and
plug the battery onto it (Fig. 6).
• Activate the compressor with the On/Off
switch (Fig. 7).
• Following operation Ofaround 30 minutes, the
compressor should be deactivated
minutes to allow it to cool.
• The compressor should be deactivated
ing operatlon and disconnected
power supply. Release the remaining air by
actuating the lever on the airbrush.
• The paint sprayer can be inserted
airbrush holder when not in use (Fig. 8).
• Release the air from the compressor
ensure smooth reactivation.
on the airbrush for this purpose.
charged to
level.
for 10-15
follow-
from the
into the
again to
Actuate the lever