Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety
instructions:
Please read the operating manual carefully prior to commissioning
to the product.
• The compressor
power pack is only suitable for a 100-240 V AC socket.
• Ensure that wall sockets, extension cables or multiple sockets are not overloaded
commissioning the unit.
• Never use the compressor outdoors if it is raining or the ground is wet.
• Always position the compressor on a stable, level surface.
• Always be present when the unit is operating.
• DOnotdepositunyobjectson the compressor a nd refrainfrom leaningthem againstthe unit.
• The compressOr should be kept dry and clean at all times and used in a well-ventilated environment.
• Ensure that the maximum pressure Ofairbrushes, spray guns or Other pneumatic instruments is not
exceeded. Adhere to manufacturer's specifications for the compressor to avoid damage and risks.
• Check that the compressor is running correctly prior to working on the human body (e.g. in cosmetics).
• Do not stick any objects which do not belong to the unit into openings on the compressor.
• Do not touch the compressor during or shortly after use, as it heats up during operation.
• The compressor
deactivates
the unit for 15-30 minutes from the power supply in this case to allow it to cool and then switch
it on again.
• DOnot use any lubricants on the compressor. These can cause damage.
• The pressure Ofthe compressor should not exceed 1.8 bar during operation.
• DO not fill the airbrush
• Switch Offthe compressor immediately and disconnect it from the battery / power supply if you notice
anything unusual during operation.
• Do not dismantle the compressor or modify it in any way. Incorrect use of the parts can damage the
compressor,
battery and power pack and harbours health risks for the user.
• In the event of damage to parts of the unit, replacement
manufacturer
or specialised
Environmental
protection
The symbol on the product, operating
product should not be disposed of in normal household
life. It should be brought to a collecting
devices. Materials should be recycled according to their respective markings.
of old devices or the recycling or other re-use of materials contained
an important contribution
Technical
data:
• Air passage: 6-7 LPM
• Maximum pressure:
• Weight:
Kg
• Size:
cm (length) x 9,5 cm (width) x 7,5 cm (height)
•
Maximum
usable
nozzle
10
10
automatically
in the event of overheating
with flammable
or toxic
dealer.
instructions:
manual or the packaging indicates that this
point for the recycling of electrical and electronic
to environmental
protection.
1.8 bar
size:
0.2 mm
and observe the instructions
material.
or repair should only be entrusted to the
waste at the end of its service
therein represents
when
or a voltage drop. Disconnect
Recycling
relating
Werbung
