Herunterladen Inhalt Inhalt Diese Seite drucken

Nordmende RPS 3302 Bedienungsanleitung Seite 23

Inhaltsverzeichnis
Tastkopf
mit dem
Y-Eingang
eines
Oszillos-
kops verbinden.
Sagezahnausgang
mit dem X-Eingang verbin-
den.
Sender auf 10,7 MHz abstimmen.
L 372 abgleichen, bis auf dem Oszilloskop eine
Schwebungsmarke sichtbar ist.
4.9.2
470 kHz-Wobbler (Frequenzabgleich)
Betrieb wie unter 4.9.1 beschrieben.
A70 kHz-Wobbler einschalten.
Sender auf 460 kHz abstimmen.
L 371 abgleichen, bis auf dem Oszilloskop 460
kHz-Marke sichtbar ist.
4.9.3
Hub- und Mittenfrequenzkontrolle
Betrieb wie unter 4.9.2 oder 4.9.3.
Bei Betatigung des Mittenfrequenzreglers muB
sich die Mittenfrequenz
des 10,7-MHz-Wobb-
lers von
etwa
8...
11,5 MHz
verschieben
lassen.
(beim 470 kHz-Wobbler
von 440 .
480
kHz).
({Kontrolle
Gber
Schwebungsmarke
mit dem Sender).
Bei
Rechtsanschlag
des
Hub-Potentiometers
muB
im 10,7 MHz-Bereich
ein Hub
von
ca.
+ 1,4 MHz erreicht werden.
(Im 470 kHz-Be-
reich soll der Hub 10 kHz betragen).
L706
C715
L705
C713
R203-—-——
C719
L708
C72)
L709
L704
Connect the Y-input of the oscilloscope to the
HF-insertion head and the X-input to the saw-
tooth output of the unit. Tune the signal gene-
rator frequency to 10.7 MHz.
Align the inductance L 372 until a beat marker
is visible on the oscilloscope.
4.9.2
470 kHz-Sweep Generator
(Frequency Alignment)
Use
the same
connection
as under
position
4.9.1.
Select sweep range 470 kHz.
Tune
the signal generator
frequency
to 460
kHz.
Align the inductance L 371 until a beat marker
is visibe on the oscilloscope.
4.9.3
Check
Sweep
width
and Centre
Fre-
quency
Use
the same
operations
as under position
4.9.1 and 4.9.2.
Tune the centre frequency control from the left
hand stop to the right hand stop. The centre
frequency
shift
must
be tuneable
between
~
f4n 7
| a
a
8...
711.5 MHz
(10.7
MHz
range)
or between
440 ... 480 kHz (470 kHz-range).
A the right hand stop of the sweep
width
control the sweep width shall have a value of
approx. + 1.4 MHz in the 10.7 MHz-range and
10 kHz in the 470 kHz-range.
c7i
L703
C709
L702
C707
\\\]
/
C722
c701
R320
R775
Abb. 5
Fig. 5
R701
23
L710
Inhaltsverzeichnis
loading

Inhaltsverzeichnis