Cleaning And Maintenance - Zeegma Rotee Chef Multi Bedienungsanleitung

3.
Once heating is complete, open the upper casing using the handle (5, fig. A).
4.
Disconnect the power and leave the upper hob open to cool it down.
EN
REPLACEMENT OF HOBS
The product contains 5 interchangeable hob sets. To replace the hob, switch off and
disconnect the appliance from the power supply and leave it to cool down. Open the
upper casing of the toaster(1, fig. A) and unlock the hob fixing bracket (3, fig. B). The
hob will spring back automatically.
INSTALLATION OF HOBS
To install the hob, switch off and disconnect the appliance from the power supply and
allow to cool. Open the upper casing of the toaster (1, fig. A) and unlock the hob fixing
bracket (3, fig. B). Slide the hob groove (a, fig. 1) into the casing hinges (b, fig. 2). Make
sure the hob is tightly restrained. Press down until you hear a click.

CLEANING AND MAINTENANCE

1.
Unplug the appliance from the power source and allow it to cool down before cleaning.
2.
Never immerse the entire appliance or hobs in water or wash them in the dishwasher.
The outside of the appliance can be cleaned with a soft, damp cloth.
3.
The hobs, once cooled, can be cleaned by hand under a direct stream of water using
mild cleaning agents and a soft, non-scratching cloth. Avoid intensive washing of
the back of the hob if this is not necessary.
Important! Abrasives and metal utensils should not be used for cleaning, which can
damage the coating of the hobs.
The photos are for illustrative purposes only, the actual appearance of the products may differ
from that shown in the photos.