the power source and allow it to cool down before cleaning
and after use.
Do not use a damaged or malfunctioning appliance or one
12.
with a damaged power cord or plug.
Do not repair or modify the appliance. These actions may
13.
only be undertaken by an authorised service centre.
Use only original or manufacturer-recommended spare parts.
14.
Do not pull or carry the appliance by holding the cable. Do
15.
not place any objects on it. Do not pull the cable over sharp
edges of walls and furniture and do not allow it to come into
contact with hot surfaces. Keep the appliance away from
heat sources, high temperatures, hot surfaces, direct sunlight,
sources of sparking, open flames.
Important! Use the product placed horizontally on a flat and
16.
stable surface.
CAUTION! Hot surface – surfaces may become hot during
use.
PRODUCT DESCRIPTION (FIG. A)
1.
Upper casing
2.
Lower casing
3.
Standby light
4.
Heating light
5.
Handle
PRODUCT DESCRIPTION (FIG. B)
1.
Upper hob
2.
Lower hob
3.
Hob fixing brackets
BEFORE FIRST USE
1.
Peel off and remove any packaging components.
2.
Clean the hobs with a damp cloth or sponge and warm water.
3.
Dry the appliance with a cloth or kitchen towel.
Important! Do not clean the appliance directly under a jet of running water.
Important! When using the appliance for the first time, a slight smoke or unpleasant
odour is possible. This does not affect the safe use of the appliance. Unpleasant odours
will cease with the next use of the product.
OPERATING INSTRUCTIONS
1.
Plug the appliance into a power source. The lights (3,4, fig. A) will light up to indicate
that the toaster has started to heat up. The standby light will stop illuminating when
the toaster has heated up.
2.
Open the upper casing of the toaster (1, fig. A) place the meal on the lower hob (2,
fig. B) and close the upper casing.
EN